Many men thought about enlarging the penis, but the methods they are familiar with are somewhat scared.There is such a tool in medicine as a vacuum pump.
It is used for surgery of male genitals to maintain the size of the penis.
How does the pump act
The principle of work is quite simple.With the help of a vacuum around the penis, low pressure occurs, leading to stimulation of blood circulation.Therefore, the cavernous tissues are filled with blood, which is why a rapid enlargement and hardening of the penis occurs.A similar phenomenon in medicine is called hyperemia.
During the erection, the tissue of the penis is poured with blood, from which they swell heavily.The vacuum pump stimulates the vessels and allows you to maintain a member of 30 to 60 minutes.This device can also be used instead of massage.
The pressure in the flask expands the cavernous bodies, significantly increasing the blood flow and the size of the penis.The post -pump member looks much more spectacular than with ordinary excitement.
Do not abuse a vacuum pump during use.The genitals will not become more than this, but bleeding, bruising and other complications may occur!
Varieties
All vacuum pumps have a similar design without taking into account their principle of operation.The vessel in which the male organ is located is a plastic split flask.Along with it, there is a nozzle of the seal and a pear that pumps the pressure inside the flask.
There are devices with additional devices: pressure control buttons, gauge, reset valves.
In manual air, it is pumped and removed with a pear or piston.Their application is good as they are accessible to any person who wants to increase their genitals.
In automatic vacuum, it is created using an electric pump operating on batteries.The pressure can be observed on a mounted pressure gauge, and some samples are equipped with an absorption button.
Water devices are a more modern option for enlarging the male penis.Their principle of action is based on the fact that instead of air, the flask is pumped with pump water.Hydraulic foam has a greater efficiency and its life is longer.
How do I choose a pump?
The device is selected according to two criteria: in terms of genitals and a specific task.
- The length of the vessel should be at least 2-3 cm larger than the penis in an excited state;
- The diameter of the flask should be selected 1-2 cm greater than the diameter of the male element during erection;
- For those who do this for the first time, experts advise to use manual pomposity where air pumping is done with a pear.
It is better to buy a transparent flask apparatus to monitor the process and also pay attention to the power of the material from which it is made.
Pluses and disadvantages
The vacuum pump for men can not only increase the size of the penis, but also have a therapeutic effect.If you use it constantly, the volume of male genitals increases over time and during sexual contact, the erection remains much longer.This is due to a decrease in organ sensitivity.
In addition, male dignity increases not only in length but also in width.
Also, under the influence of vacuum, you can adjust the form of a male organ, especially if it has curvature.Inside the pump, the penis is kept evenly from the edges of the walls, thus straightening.
The consequences of improper use:
- Due to the disruption of the capillaries, special spots occur on the skin of the penis;
- reduction of ejaculation or erection;
- Tingling.
Efficiency
With constant use, after six months the shape and size of the penis will become unchanged.The result will be much more effective if you are taking medicines that increase the release of male hormones during this time.
The member after the pump was up to 3 cm longer, for a period of 6 months to a year.The thickness of dignity increased to 2 cm.
Instructions for use
If the vacuum pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Improper use can lead to disorders of some functions as well as edema.
In order to prevent this, the following recommendations must be followed
- First, the air must be pumped from the device, this will improve the circulation of blood flow to the penis.Before that, you need to take care of the penis lubrication.
- An enlargement of the penis should not last more than 20 minutes.
- To reduce the pressure inside the container, you need to start air.To do this, simply click on a special valve placed near the pear.In some models, there is a small hole for these purposes, which is covered with a finger during the procedure.
- Once the member has reached maximum hardness, you must put a ring on your base, which provides an overgrown organ and holds it in an erection state.
- If a hydraulic pump pump, then you need to take a relaxing hot water bath before the procedure.Then, after 8 minutes, the male dignity should be placed in a vacuum vessel.The ring should fit tightly to the scrotum, thus reducing the pressure in this area.The device is placed in such a way that the distance from the penis to the walls of the flask is the same on all sides.It is important to do this before the start of suction.Observing these instructions, injuries can be avoided.
- In order to form a vacuum environment, experts advise to make several oscillatory movements.Then excess water is lowered with a trigger.Sometimes the pump should be pressed several times so that all the excess liquid leaves.
- After lowering the water, you can rest a little, then move on to the procedure.If the pressure drops, it must be pumped at the required level.
The male advantage can be increased with the help of a set of special exercises, but you need to follow all the recommendations for the use of the device.
The procedure is performed 10 minutes once a day during the first week.
During the second week, 15, for the third 10 minutes twice a day.
The fourth - twice a day for 15, fifth - 20 minutes in the morning and 10 in the evening.
Possibilities
Incorrect use of the device often occurs injuries.
- Due to the stagnation of the lymph, a swollen ring appears around the head of the penis.Sometimes this problem can occur even with proper use.In such cases, it is better to stop the procedure for some time.
- As a result of prolonged manipulations or low pressure, a huge flow of lymph appears in the vessel, forming swelling.
- Erection deterioration is the most frequent consequence.
- With heavy load, a change in skin color may occur.Due to severe discharge, bleeding often occurs, which can be irreversible.
- Blood vessel block is the most common problem, but dangerous, so it is better to delay the venture to enlarge the penis.
Contraindications
The duration of the vacuum medium is determined by enlarging the cells.Subject to all recommendations for the use of the device, a pulse effect is created inside the vessel.As it increases, a negative pressure occurs, which causes numbness and one does not experience pain.
The maximum volume of vacuum should not cause pain, but one effect of no more than 18 seconds.The duration of vacuum manipulations per day should not exceed 45 minutes.
Men's penis has the following contraindications:
- Diabetes sugar;
- sexually transmitted diseases;
- inflammation of the urethra;
- deterioration of the function of the excretory organs of the digestive system;
- cardiovascular pathologies;
- The risk of blood clots.
The operation of the device
In order for the device to maintain its suitability as long as possible, it needs special care.Given that the manipulations are performed in an intimate place, which requires careful compliance with the rules of personal hygiene, the pump should be treated with antibacterial solutions.
Before use, it is recommended to wash the vacuum pump with hot water and soap and to treat all its components with antiseptics.After the procedure, this invention is sterilized again, wiped and stored in a clean, dry place.
How to do it yourself?
The device can not only be useful for increasing the size of the genital organ of a man or healing therapy.
The pump can be made of improvised means that are stored in the garage or closet.
From the cuff pump
Before you begin production, it is necessary to prepare all spare parts and tools that may be useful for use.A vacuum pump is usually made by a car or a bicycle cuff pump.This is the simplest and most reliable method.
First, you need to create the opposite effect of the pump so that it does not supply air, but on the contrary, to pull it.In order to perform such an effect, it is necessary to unfold the pump, rotate the cuff with the back, and then assemble the device.This will create a vacuum environment.
Then install the control valve to lower excess air.For this, the aquarium compressor valve is suitable for this.It is mounted in the pump hose to prevent air from penetrating the pump.For a greater effect, it is recommended to make your seal.
This method is the simplest and is designed to create a shallow vacuum environment.Productivity is up to 80% air pumping.If you need to make a powerful pump, you can use a household compressor.
Using a medical syringe
We make a vacuum pump from a simple medical syringe.This will require the following materials:
- plastic triple;
- a plastic tube that must match the diameter of the holes of the triple and the syringe;
- two valves of the aquarium compressor;
- The syringe (the strength of the future device depends on its size).
From the plastic tube it is necessary to cut three pieces of 10 cm, then attach them to the trinity.The joints should be airtight and well fixed so that they do not pop up when pressure occurs.A three -bouncing triple should be obtained.
One of them, located in the center, is attached to the nose of the syringe.On the other two ends it is necessary to install the valves and one must open, the other inwards.In order not to be confused, the arrows are usually placed on the aquarium valves showing the direction of the air movement.
Such a syringe device can pump liquid from one container to another.
In order to perform the procedure, one withdrawal with a valve is lowered into the liquid and the second into an empty vessel, which must be filled.The pump is driven using a piston.